Linksys, A division of Cisco Systems, Inc. Product: WRT54G Classification: Firmware Release History Firmware Date: 8/18/2005 Release Date: 8/25/2005 Last Firmware Version: 4.20.7 __________________________________________________________________________ Firmware 4.20.7 - Resolved issue with SecureEasySetup button delay - Resolved issue with SecureEasySetup overwritting current wireless settings - Resolved issue with not being able to disable SecureEasySetup button - Resolved issue with Diag light being constantly lit after upgrading to 4.20.6 on v.1 hardware - Resolved issue with iDefense security vulnerability - Resolved issue with L2TP disconnect - Resolved issue with SecureEastsetup long button push not resetting wireless settings Firmware 4.20.6 - Resolve issues with setup wizard - Updated wireless security menu - Resolve issues with port based QoS Firmware 4.00.7 - Adds SecureEasySetup push button support - Resolves large file transfer issues - Resolves issue with enabling TKIP after enabling WEP - Updated QoS features - Resolves issues with multiple Access Restrictions policies - Resolves issue where multicast breaks when MAC filter status changes Firmware 3.03.6 - Supports hardware version 3 - Updated help file Firmware 3.03.1 - Wi-Fi certified Firmware 3.01.3 - Updated wireless driver - Supports hardware version 2.2 (cannot downgrade to previous versions) - Resolves issue with VoIP adapters - Resolves issue with long domain names Firmware 2.04.4 - Updated wireless driver - Updated certificate generation for https access Firmware 2.04.3 - Resolves issue with disabling firewall - Added QoS function - Added Port Triggering function - Added L2TP option for WAN connection type - Added ability to back up and restore configuration files - Added Wireless isolation function - Added ability to filter internal NAT redirection - Added ability to restrict access to web GUI from wireless clients - Added ability to filter IDENT port 113 - Resolves issue with HeartBeat WAN connection - Added support for 40/56bit cipher to support old browsers to use https - Resolves issue with PPTP passthrough - Changed WPA Group Key renewal time range to 600~7200 seconds - Added IGMP proxy support - Added ability to allow web GUI access only through https or http Firmware 2.02.2 - Updated wireless driver to support all versions of WRT54G hardware - Adds support to allow WAP54G connect as a repeater - CTS protection mode set to disable by default to improve wireless performance in normal environments - Resolved issue where the WLAN LED stays on even when wireless is disabled - Resolved security vulnerability causing the web server in the router to crash Firmware 2.00.8 (WRT54G v.2 only) - Updated wireless driver Firmware Version 1.42.2 - Updated wireless driver to 3.31.15 - Added URL and contents filters - Added L2TP passthrough - Added HeartBeat Signal support - Resolved issue with Connect on Demand Firmware Version 1.41.2 - Updated GUI format and layout Firmware Version 1.30.7 - Adds UI control to enable/disable frame bursting - Resolves issue with firmware upgrade error in Internet Explorer 6.0.2800.1106.xpsp2.030422-1633, on Windows XP pro. - Send 192.168.1.1 to disable DynDNS - Resolves issue with using the 4th tx key for WEP - Resolves issue with disconnecting PPPoE causing WPA to be disabled Firmware Version 1.30.1 - Adjust PPTP max MTU value from 1400 to 1460 - The router is now certifiable for the UPnP logo - Complies with final 802.11g standard - Improved performance asymmetry between the transmit and receive paths - Receive Broadcast packets from renew state. Some DHCP server (Dlink 300G+) send broadcast ACK after it receives a REQUEST - Fix: The firmware upgrade will fail, if DDNS updates while upgrading - Fix: If first DNS address fails, the second or third DNS address will be used to resolve domain names - Added the following items under Setup Page: - Router Name - Manual Time Server - MAC Clone - wireless domain - Security Settings - Added the following items under System Page - UPnP enable/disable - Ping Test and Traceroute - Added the following items under Wireless Page - CTS Protection Mode - Basic Rate - Added the following items under Status Page - Router Name - Start IP Address - End IP Address - Added Wi-Fi Protected Access(TM) support including AES and TKIP encryption - Resolves issue with Port Forwarding name showing up as garbage characters - Added "B-Only" option to wireless modes - Added "Default" option to Basic Rate settings Firmware Version 1.02.1 - Incorporates updates found in the Draft IEEE 802.11g version 6.1 specification - Resolves interoperability issues with legacy 802.11b devices under Mixed Mode - Resolves a performance bug where the performance in a mixed b, g network did not go up once the last b client disassociated - Resolves issue where WEP degrades performance - Resolves issue with TZO DDNS Service - "Domain Name" replaces "name" - TFTP server will only verify image file name "xxxx.bin" - MAC Address Filter under the Advanced tab works on both wired and wireless clients - Fixed a bug that prevented wireless clients from connecting to the Internet if there was no active wired PC (PPoE customers in Europe and China only) - Support for UPnP enabled applications such as MSN Messenger - Fixed a bug that caused computers connected to the LAN ports to be dropped at some interval only to be immediately re-connected - Fixed Dynamic Routing issue between 2 Routers - Allows User to name Static Route Configurations - Modified PC List Web Page to avoid confusion - Stabilized Wireless-G to LAN and WAN Throughput - Stabilized Wireless-B to LAN and WAN Throughput - Improved LAN-WAN Throughput Firmware Ver.: 1.01 - Initial release